The Simplicity of Dense Packing with a Cool Machine Insulation Blower

The Simplicity of Dense Packing with a Cool Machine Insulation Blower

airlock-pressure-gauge copySetting up a Cool Machine to dense pack is very easy, fast and most importantly – accurate. Whether you are dense packing fiberglass, cellulose, rockwool or any other material designed to dense pack, achieving a proper pressure is critical.

We sell hand-held gauges if your insulation blower does not have a gauge.

We sell hand-held gauges if your insulation blower does not have a gauge.

All of the blowers we sell are fully capable of dense packing. The CM1500s and above have embedded gauges in the airlock. These gauges have a green region highlighted within the acceptable realm of PSI for proper packing.

Here is the simplicity of setting up your machine. With the entire length of hose you will be using…

  1. Dial one blower, slowly increasing the speed
  2. While cupping your hand over the end of the hose to back pressure the air
  3. Increase the blower speed until the gauge reads within the green area (approx. 3.5 psi)

 

Below is a video: